This library is not tested with hardware yet. (it is based upon datasheet + app note). If you have hardware and can test with SPI, please let me know (open an issue). The BL0940 is a configurable ...

The Dabao open-source hardware board features a Boachip-1x RISC-V MCU, whose RTL Verilog files are also open, and is IRIS inspectable.

iC-Haus presents the iC-MBE, a high-performance BiSS Interface Master implementation with on-chip RS-422 transceiver and 20 Mbit/s SPI. This compact SPIto-BiSS converter has been designed to meet the ...

When compiling for an ESP32-S3 (and apparently also an -S2) with the Arduino framework, the SPI component always selects SPI 2 (FSPI) in the generated C++ code, even if interface: spi3 is specified.

Design compromises required for interfacing sub-10-nm SoCs with traditional 1.8-V SPI NOR flash. How a dual-voltage SPI NOR architecture can reduce BOM and simplify ...

10Base-T1S (henceforth in this blog referred to as T1S) is a relatively new standard for a 10Mbit/s single-pair Ethernet over an unshielded, single-twisted pair that was introduced with the IEEE ...

Hi, I'm Bill. I'm a software developer with a passion for making and electronics. I do a lot of things and here is where I document my learning in order to be able to inspire other people to make ...

Written by Paul Yeh, Applications Engineer, Renesas Electronics. Serial Peripheral Interface (SPI) is a widely used high-speed communication protocol—typically operating above 1MHz—that enables ...