IEEE

Design and Implementation of Single Precision Floating-point Arithmetic Logic Unit for RISC Processor on FPGA

Abstract: The main purpose of conducting this research is to design and implement a single precision floating-point arithmetic logic unit (ALU) that considered as a part of the math coprocessor. The ...
IEEE

Analysis and Design of a Novel Six-Switch Five-Level Active Boost Neutral Point Clamped Inverter

Abstract: This article presents an analysis and design of a new boost type six-switch five-level (5L) active neutral point clamped (ANPC) inverter based on switched/flying capacitor technique with ...
IEEE

A Compiler for Sound Floating-Point Computations using Affine Arithmetic

Abstract: Floating-point arithmetic is extensively used in scientific and engineering applications to approximate real arithmetic. Unfortunately, floating-point arithmetic is not a sound ...
IEEE

Analysis of vertical cross-point resistive memory (VRRAM) for 3D RRAM design

Abstract: An analysis of 3D VRRAM is presented, taking into account read/write margin, leakage and power consumption. The results give guidelines for array dimensioning (number of layers / in plane ...
IEEE

Considering Operating Point Variation in 3-D Analytical Charge Model Used for Design of Low-Stiffness Permanent Magnet Vibration Isolator

Abstract: Vibration isolators are a key technology in ultraprecision machining and ultraprecision measurements. The increasing performance requirements of magnetic vibration isolation systems (MVISs) ...
IEEE

Automated Copper Layer Design and Optimization Tool based on Progressive Point Expansion Algorithm for Switch Mode Power Supplies

Abstract: Switch mode power supply (SMPS) layout design requires a more refined iterative design and testing process due to its stricter performance considerations at present. Design automation (DA) ...
GitHub

isuckatcs/how-to-compile-your-language

This guide assumes that the project is being built on Linux* but equivalent steps can be performed on any other operating system. cmake path/to/repo/root && cmake --build . To run the tests, proceed ...